
Kingston 2GB, DDR3, 1333MHz (PC3-10600), CL9, DIMM Memory, Single Rank
Manufacturer : KINGSTON
Manufacturer Part Code : KVR13N9S6/2
Category :
Memory - Desktop
Weight: 0.0205 kg
Price : £
18.18 + £ 5.20 Postage per Order (UK)
Updated : 28-02-2021 07:02:36
2GB 1Rx8 256M x 64-Bit PC3-10600 CL9 240-Pin DIMM
DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 256M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.
Features
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB Height: 0.740” (18.75mm), single sided component
Description
Specification
- Series: Kingston ValueRAM
- DDR Type: DDR3
- Size: 1 x 2GB
- #Hide#Individual Module Size: 2GB
- #Hide#Total Capacity: 2GB Total
- Speed: 1333 MHz
- Compliance: PC3-10600
- Pins: 240-pin
- CAS Latency: CL9
- Data Integrity Check: Non-ECC
- Voltage: 1.5V
- Heatsink: No
- #Hide#LED Lighting: No
- Additional Information: Single rank
On-Die Termination (ODT)
Unbuffered - Package Type: Blister Pack
- Package Weight: 0.0205 kg
- Warranty: Lifetime
Once you have made your purchase, we can help provide support, remotely or on-site, quickly, from our un-reveiled support service.
We can also provide you Installation Service, to help you get your new product or device working.
You may want to have some training, on how to use your new purchase, we can help there too, Remote Training, to help you to get the best out of your new product or device.
We can also provide you Installation Service, to help you get your new product or device working.
You may want to have some training, on how to use your new purchase, we can help there too, Remote Training, to help you to get the best out of your new product or device.
Comments/Review
Add your comment here
** Spammers will be logged, blocked and reported, we automatically block Tor posting